Tools list
This is page 3 of 10 of a how-to on how to build an outlet/relay module.
The main project page is here.
The tools list for this project are:
- Soldering iron and solder. We'll be soldering wires to 4 pins on
the relay and 2 pins on the terminal block.
- Hot glue gun. We'll be hot-gluing the relay to the bottom of the
electrical box and the terminal block to the side of the box.
- Drill with a very small bit to drill 2 holes for the terminal block pins.
- Wire stripper.
- Screw driver for screwing the wires onto the outlet and the outlet into the
electrical box.
- Utility knife or similar cutting device for splitting open the power cord.
On to the next step - Construction part 1
Back to the previous step - Parts list
Back to my how-to index
Back to my Halloween index
Page last modified 03/16/2009